For the first real post, let's address our first .22 rimfire cartridge; indeed our first-ever metallic cartridge of any stripe:

.22 Short

From Wikipedia, the free encyclopedia

.22 Short
.22 Short, left; .22 Long Rifle, right
Type	Rimfire
Place of origin	USA
Production history
Manufacturer	Smith & Wesson
Produced	1857
Specifications
Bullet diameter	.223 in (5.7 mm)
Neck diameter	.224 in (5.7 mm)
Base diameter	.225 in (5.7 mm)
Rim diameter	.273 in (6.9 mm)
Rim thickness	.040 in (1.0 mm)
Case length	.423 in (10.7 mm)
Overall length	.686 in (17.4 mm)
Primer type	Rimfire
Ballistic performance
Bullet weight/type	Velocity	Energy
27 gr (1.7 g) RN	1,164 ft/s (355 m/s)	81 ft·lbf (110 J)
29 gr (1.9 g) RN	830 ft/s (250 m/s)	44 ft·lbf (60 J)
49 gr (3.2 g) RN	1,132 ft/s (345 m/s)	140 ft·lbf (190 J)
Source(s): Cartridges of the World [1]

.22 Short is a variety of .22 caliber (5.6 mm) rimfire ammunition. Developed in 1857 for the first Smith and Wesson revolver, the .22 rimfire was the first American metallic cartridge^[2]. The original loading was a 29-grain (1.9 g) or 30-grain (1.9 g) bullet and 4 grains (260 mg) of black powder. The original .22 rimfire cartridge became designated the .22 Short with the introduction of the .22 Long cartridge in 1871. Developed for self defense, the modern .22 Short, though still used in a few pocket pistols and mini-revolvers, is mainly used as a quiet round for practice by the recreational shooter. The .22 Short was popularly used in shooting galleries at fairs and arcades; several rifle makers produced "gallery" models for .22 Short exclusively. Due to its low recoil and good inherent accuracy, the .22 Short was used for the Olympic 25 m Rapid Fire Pistol event until 2004, and they were allowed in the shooting part of modern pentathlon competitions before it switched to air pistols. .22 Short blank cartridges are used in several makes of starting pistols.

Overview

.22 Short cartridge.

North American Arms model NAA22S mini-revolver, chambered in .22 Short.

Most .22 Short bullets are made of lead (usually coated with grease or wax or copper plated) in round nose or hollow point styles. Bullets for use at shooting gallerys were often made of compressed powdered metal that disintegrated on impact to avoid ricochets and over-penetration of backstops. The standard velocity .22 Short launches a 29-grain (1.9 g) bullet at 1,045 feet per second (319 m/s) with 70 ft·lbf (95 J) of energy from a 22 in (559 mm) rifle barrel and can penetrate 2 inches (51 mm) of soft pine.^[1]
As a hunting round, the high velocity hollow point Short is useful only for small game such as tree squirrels and rabbits. For small game hunting in general, the greater energy and wider ammunition selection of the .22 Long Rifle make it a more popular choice. In the American South, the .22 Short hollow point is still very popular for use on raccoons, which are treed at night using dogs and shooting is at close range. In some states, the .22 Short is the only legal round to use for such hunting.^{[citation needed]}
Although the .22 Long Rifle has surpassed the .22 Short in the market place, many ammunition companies still produce .22 Shorts, and in a fairly wide variety. Most makers utilitilse the standard 29-grain (1.9 g) solid round nose bullet and 27-grain (1.7 g) hollow point bullet weights for the .22 short. CCI makes several types: a CB Short at 727 ft/s (222 m/s), Target Shorts at 830 ft/s (250 m/s), their standard Short round with plated round nose bullet at 1,080 ft/s (330 m/s), and a high speed hunting load with plated hollow point bullet at 1,105 ft/s (337 m/s). The .22 Short high-velocity exceeds the performance of the .22 Long and the .22 Short has displaced the .22 Long as an alternate to the .22 Long Rifle for many .22 shooters. Fiocchi makes their Exacta Compensated Super Match SM200 with lead round nose at 650 ft/s (200 m/s). Remington produces a high velocity plated round nose at 1,095 ft/s (334 m/s). Aguila makes both a match lead round nose at 1,095 ft/s (334 m/s), and a "high speed" round with plated bullet also listed at 1,095 ft/s (334 m/s). Also available is the fine RWS R25 match ammunition at 560 ft/s (170 m/s). Eley also makes their Rapid Fire Match cartridge at 750 ft/s (230 m/s).
Most of the target oriented and CB shorts are very quiet, due to being subsonic. When fired from a full-length rifle barrel, most .22 Short loadings are as quiet, if not quieter, than the average air rifle.
The Aguila SSS (SubSonic Sniper) round uses a .22 Short case with a 60-grain (3.9 g) bullet (twice the weight of the .22 Short bullet and half again as heavy as the .22 Long Rifle bullet) giving an overall length of a .22 Long Rifle round, making categorizing the SSS problematic: while the SSS case size is .22 short, the firing chamber of the barrel must be .22 LR dimensions to accept the SSS cartridge.

.22 Short caliber rifles

There have been many rifles chambered for the .22 Short over the years, but none are currently in production. Many rifles in .22 Short were made between 1901–1940, mostly intended for gallery shooting and small game hunting. Remington and Winchester produced the most rifles in .22 Short. Remington has made their Model 24 and Model 241 "Speedmaster" semi-autos as well as their Model 12 and 121 "Fieldmaster" pump actions in .22 Short. Remington's Nylon 66GS Gallery Special (1962 to 1981) was one of the last .22 Short-only rifles made especially for shooting gallery use. Winchester produced a variety of different rifles in .22 Short caliber including the 1873 lever action, 1885 single shot (in both Low Wall and High Wall variations), Model 1890, 1906 and 62A pump actions, Model 74 semi-auto and the Model 61 pump action. Many of their bolt action rifles were available on a special order basis in .22 Short. Browning/FN also produced their dainty takedown semi-auto in .22 Short, on the same John Browning design upon which the Remington Model 24 is based.
Note that many of these rifles are now collectors’ items, particularly the Winchesters, and demand a premium in price over the same rifle chambered in .22 Long Rifle.
It should also be noted that many rifles marked ".22 Short, Long and Long Rifle" (or ".22 S, L, LR") will not shoot Short rounds with the same degree of accuracy as they will a Long Rifle nor as accurately as a rifle designed for .22 Short exclusively. This is due to the .22 Short round using a 27–29 grain bullet, which requires a barrel with a 1-20 to 1-24 twist. A rifle for "Short, Long and Long Rifle" will normally have a 1-16 twist, which is proper for .22 Long Rifle rounds using 40 grain bullets. In addition, the excess chamber length needed to allow chambering of .22 LR cartridges requires the bullet from a .22 Short to travel a short distance before it engages the rifling, which is detrimental to accuracy. If one is intending to shoot only Shorts and wants a high degree of accuracy, one would be best served with a rifle designed and chambered for the Short only.

References

1. ^ ^{a b} Cartridges of the World 11th Edition, Book by Frank C. Barnes, Edited by Stan Skinner, Gun Digest Books, 2006, pp. 476, 490, 492. ISBN 0-89689-297-2.
2. ^ The Gun Digest Book of .22 Rimfire: Rifles-Pistols-Ammunition. Gun Digest Books. 2005. ISBN 0873499085. 

• .22 Rimfire Cartridges by Chuck Hawks

• This page was last modified on 26 December 2010 at 07:20.
• Text is available under the Creative Commons Attribution-ShareAlike License; additional terms may apply. See Terms of Use for details.
  Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc., a non-profit organization.
• Contact us

• Privacy policy
• About Wikipedia
• Disclaimers

• 
•